Integrated Display

SCC Ver 4 Display Sensor

The SCC Ver 4 Display Sensor is a version of the standard SCC sensor that replaces the wired or Bluetooth interface with a small OLED display. The SCC-D version requires no external displays, interfaces, or power. When installed on a sheave wheel it will display cable deployed in real time.

· Simplified mounting requiring a 1⅝ “hole and 4 X #8 machine screws.

· The SCC-D can be installed on sheave wheels from 6 to 36 inches

· Easy configuration, calibration and battery charging via USB.

· Battery powered with duration of at least 24 hours under normal use.

· High contrast daylight readable OLED display.

· Sensor can be reset from the sensor itself.

· Auto dimming display to save battery power.

· Readout in Feet or Meters.

· Same physical format as all other Ver 4 sensors.

· Hermetically sealed for use in harsh and wet environments.

The SCC-D is a completely self-contained sensor used to measure the cable length as it is deployed or recovered. This sensor may be useful, when for example, the cable needs to be deployed to a preset length or when a very fast and simple mobilization is required.

Other uses are small boat operations where additional cables or devices is undesirable.